Earthwork.io

Home / Reference / Swell and shrink factors

Swell and shrink factors for earthwork calculations

Dirt changes volume when you dig it and again when you compact it. These factors convert between bank, loose and compacted cubic yards.

The three states of dirt

  • Bank cubic yards (BCY) are measured in the ground, before digging. Plans and takeoffs measure cut in bank yards
  • Loose cubic yards (LCY) are measured after digging. Soil swells when it is broken up, and trucks haul loose yards
  • Compacted cubic yards (CCY) are measured after the soil is placed and compacted. Fill is measured in compacted yards

Typical factors by material

MaterialBank to looseBank to compactedSwellChange when compacted
Sand or gravel1.110.9511%Shrinks 5%
Loam (common earth)1.250.9025%Shrinks 10%
Clay1.430.9043%Shrinks 10%
Rock, blasted1.501.3050%Grows 30%

Source: U.S. Army Field Manual 5-434, Earthmoving Operations, Table 1-1. These are typical values. When your geotech report gives shrink and swell for the site, use those.

The formulas

  • Loose CY = bank CY x (1 + swell)
  • Compacted CY = bank CY x (1 - shrink)
  • Bank CY needed for a fill = compacted CY / (1 - shrink)
  • Load factor = 1 / (1 + swell)

Worked example

You cut 1,000 bank cubic yards of common earth. Loaded in trucks it is 1,000 x 1.25 = 1,250 loose cubic yards. Placed and compacted as fill it is 1,000 x 0.90 = 900 compacted cubic yards.

Send the plans, get a price

Quotes are free and come before any work starts. Delivery is 3 to 5 business days, nationwide.

559-593-9060

Not ready for a quote?

Leave your details and we will give you a call.

By sending your details you agree to be contacted about your request. See our privacy policy.